problems with linker?

Please note that this toolsuite is not part of the official Firewing release but we will try and help where we can...

problems with linker?

Postby richardb » Wed Apr 04, 2018 7:28 am

ok so after problems with using firewing with the native bootloader i thought id try to bypass and use a pickit and xc32 compiler.

after following this link that david posted http://www.firewing.info/pmwiki.php?n=F ... 2Toolsuite
i still get the problem


error.JPG
error.JPG (12.01 KiB) Viewed 81322 times


any suggestions ?


Richard
richardb
 
Posts: 63
Joined: Thu Aug 01, 2013 10:40 am

Re: problems with linker?

Postby Coccoliso » Wed Apr 04, 2018 8:18 am

Hi,
file must located here "C:\Program Files (x86)\Microchip\xc32\v1.30\pic32-libs\proc\32MX150F128B"
You probably used a newer version of microchip compiler and I remember a similar problem that I solved using version :
"xc32-v1.30-windows-installer"
and also a
"PIC32 Legacy Peripheral Libraries.zip" ( inside there is an exe )
and this too I downloaded it from the microchip site in the list of legacy versions.
since I find it among the installations I've used.
User avatar
Coccoliso
 
Posts: 177
Joined: Sat Sep 27, 2014 10:02 am

Re: problems with linker?

Postby richardb » Sun Apr 08, 2018 8:42 pm

do you still use firewing?

i have tried several time and the most i can get it to do is flash an led.


when i tried to build for the arduinio tft module sample file i get one ore more errors have been reported during linking, muild source file in mplam to identify the cause......


its just so unfriendly god knows how any first time micro user would cope.

i think i'm going to have to give up on firewing which is annoying as i'd like it to be a success i have bought 2 firewing boards one for work and one that i personally bought a few years ago to support the cause.

please somone update the wiki to help new users.



Richard
richardb
 
Posts: 63
Joined: Thu Aug 01, 2013 10:40 am

Re: problems with linker?

Postby Coccoliso » Mon Apr 09, 2018 8:20 am

Hi Richardb,

yes I still use it.
I use FW32 hardware and compiler for testing with its loader while for production I use the legendary PicKit 2 and XC32 compiler without using the IPE of MC ( which is just a waste of time in the real world ).
The IDE works very well without changes between the two compilers 32 except for the part of the fuses.
Last edited by Coccoliso on Mon Apr 09, 2018 12:13 pm, edited 3 times in total.
User avatar
Coccoliso
 
Posts: 177
Joined: Sat Sep 27, 2014 10:02 am

Re: problems with linker?

Postby richardb » Mon Apr 09, 2018 8:29 am

production I use the legendary PicKit 2 and XC32 compiler


you mean you write in C or you use the BASIC" ".net" "firewing compiler"?
richardb
 
Posts: 63
Joined: Thu Aug 01, 2013 10:40 am

Re: problems with linker?

Postby Coccoliso » Mon Apr 09, 2018 8:34 am

I use FW IDE (so basic) with PIC32 MC Toolsuite (that use XC32 compiler )
To go to 32MX795 use as a target board "ChipKIT Max32 " ;)
User avatar
Coccoliso
 
Posts: 177
Joined: Sat Sep 27, 2014 10:02 am

Re: problems with linker?

Postby richardb » Mon Apr 09, 2018 8:46 am

that's good to know but I just cant get it to work. maybe its a combination of windows 10 and compiler version numbers, but it soesnt seem to matter what i try something ends up stopping it from compiling fully.
richardb
 
Posts: 63
Joined: Thu Aug 01, 2013 10:40 am

Re: problems with linker?

Postby richardb » Thu Apr 19, 2018 6:23 am

hi Coccoliso, can you have a look at this?

http://www.firewing.info/forum/viewtopic.php?f=5&t=316


I didn't realise how low the activity was on this forum I only had six views of my post and 3 were from me :(
richardb
 
Posts: 63
Joined: Thu Aug 01, 2013 10:40 am


Return to Microchip 32

Who is online

Users browsing this forum: No registered users and 0 guests

cron

x