interface shield for MikroE Click adapters

Information and discussion regarding Firewing shields

interface shield for MikroE Click adapters

Postby Jerry Messina » Thu Aug 28, 2014 11:06 am

Recently I ran across this while looking for some prototype development tools, and thought it might be of interest to some here.

MikroE has 100 or so different addon boards they call Click boards. These boards are small, inexpensive adapters for just about every function under the sun... interfaces, communications, leds, detectors, etc. See http://www.mikroe.com/click/ for a list of what's available.

The boards all use a common "mikroBUS" interface (http://www.mikroe.com/downloads/get/1737/mikrobus_specification.pdf), so for the most part they're easy to use.

The reason I bring this up is that they have an Arduino compatible shield that can hold two of these mikroBUS modules, so you should be able to use most of them with the Firewing boards. http://www.mikroe.com/click/arduino-uno-shield
Jerry Messina
 
Posts: 278
Joined: Thu Feb 14, 2013 10:16 am

Return to Shields

Who is online

Users browsing this forum: No registered users and 1 guest

cron

x