Prototype Shield

Information and discussion regarding Firewing shields

Prototype Shield

Postby geoff138 » Wed Jun 04, 2014 4:23 pm

To stop other others scratching their heads! can you add some relevant information to the board info.

This is :-

Both the GND strips by the SM pads are connected to the connector that plugs in to J5 pins 6&7 on the R2 board.
The GND strip at the end of the board connects only to J6 pin 7


Their is NO connection between these GND's until the board is plugged into the Firewing which can cause confusion when continuity checking !

Regards

Geoff
geoff138
 
Posts: 7
Joined: Fri Oct 18, 2013 12:53 pm

Re: Prototype Shield

Postby David John Barker » Wed Jun 04, 2014 4:45 pm

User avatar
David John Barker
 
Posts: 489
Joined: Thu Nov 08, 2012 12:21 pm


Return to Shields

Who is online

Users browsing this forum: No registered users and 1 guest

cron

x