Help for a beginner to Firewing

[mtmcndrw]

Hello All,

I tried to get the Firewing 32 working with Windows 10 without success.

So I soldered pins and connected Pickit3 to icsp at the side of the board.

I can connect ok and even managed to erase the chip via mplab ipe v3.35. Without saving the original hex!

I would now like to load a small program to chip to flash d4 on/off like it was first doing when powered up. But even this small task seems to be beyond me.

If anyone has a test program that I can flash to chip to check if everything is ok then I would be grateful.

Thanks,

Matt