Beta reflow V2 controller
Posted: Mon Jun 01, 2020 5:50 am
Hi guys. Not sure how well this forum is patronised these days but I figured that it was worth a try. I have the Beta reflow V2 oven controller that I successfully used for PCB reflowing some years back. I made many homemade drone flight control boards with it and was reasonably happy with it's performance See here viewtopic.php?f=11&t=250 I have moved on from that hobby to learning to fix Macbook laptop computers. A steep learning curve at my age for sure. I need to ultrasonically clean the logic boards after all the soldering repairs are done and then dry the boards in an oven at a 120°C stable temperature for about 15 min to remove the detergent / ionised water cleaning solution, particularly from under the BGA chips on the logic board. I am wondering if I can modify one of the temperature profiles to do this please ? I have totally forgotten how to use the oven controller and have also moved on from Windows 7 that I was using back then to Windows 10. From memory the temperature control file was an .ini file ? so I suppose that is what needs to be edited. Any help or advice would be greatly appreciated. I would approach the controller company but they are not very forthcoming with any help after they take your money. Typical in this day and age I have found. Thanks in advance if anyone reads this and can help